Sheet Metal stamping belt clips

General artifacts in the stamping process, due to the stamping process, especially in the process of cold forging stamping processing, temperature rise quickly, must add lubricating oil, if you do not use lubrication and stamping directly, in addition to the workpiece roughness affected, die life will be shortened, accuracy is lower at the same time, this mould will have to spend a lot of improvements. It is for this reason that stamping lubrication is necessary in cold forging.

The safety measures for stamping are:

(1) To achieve mechanization and automation in and out of the material.

(2) Set up mechanical protection device to prevent hand injury. Use die cover, automatic material return device and hand tools.

(3) Set up electrical protection and power failure devices. Set up photoelectric or air curtain protection switch, two-hand or multi-hand series start switch, anti-misoperation device, etc.

(4) Improve the clutch and brake structure, in the danger signal, the press crankshaft, connecting rod, punch can immediately stop in place.

About us

Jiaxing Dexun Co., Ltd. was established in 1997, origin from Taiwan, we are professional manufacturer and exporter integrated with design, research & development, manufacturing and sales of OEM/ODM stamping parts,deep drawing parts, standard welding fasteners and non-standard welding fasteners.

* Located in jiaxing city, only about 1 hour's drive from Shanghai, Hangzhou, Ningbo, Suzhou, these important cities, the transportation is very convenient.

* 2 mature mould development workshops with advanced equipment to develop mould for customers.

* 2 International approvals,Verify & certificate in accordance with ISO9001,IATF16949, work with SGS, operate the PPAP Level 3.

* 2 labs of quality inspection,Control products quality strictly; equipped with various quality testing machines including direct-reading spectrometers, tensile testing machines, CMM machine, X-ray flaw detection instrument.

* 2 quenching and tempering heat treatment lines.

* 2 automatic welding lines.

* 4 Powder coating & Painting lines, Plating lines

* 42 people professional R&D team : 30 special technicians and 12 senior engineers.

* 20 years’experience on manufacturering OEM/ODM products

* 100 sets of automatic production machines: Have 10 sets of automatic stamping & deep drawing equipments, 50 cold forming machines; 40 tooth grinding machines ,equipped with Japan, Germany,etc imported machines.

* 175 employees

* 10 millions monthly production capacity

* 35 countries exported to

* Supplying products to GM,John deere,Wal-Mart，etc

* Implement environment protection concept; strictly operate the facilities and processes under environmental requirements.

We use advanced equipment to improve cost and quality at the same time to make sure lowest price and best quality for customers. We have quality control experts & engineers to test every piece product before shipment. We keep on studying to provide professional service.

Our Mission & Vision

We always work hard to be an environment protection model enterprise. We strive for sustainable development. We hope to be a win-win partner of our customers all over the world.

Environment protection mission:

A full series of environment policies are applied to our every manufacturing activities. Firstly, to propagandize environment protection policy to make sure environment-friendly concept is everywhere in our company.
Every new staff will have environment protection training class. All staffs have environment protection knowledge and policy lecture every month. All the operation manual will marked out environment protection requirements.
Secondly, to establish environment protection responsibility policy.
Thirdly, to have basic environment protection management.
Step 1: Have environment monitor every time.
Step 2: Manage the pollutant treatment equipment efficiently.
Step 3: Establish permit system of pollutant discharge.
Step 4: Establish legal audit system.
Fourthly, to build up emergency rescue system.